Machines // Interactive tool
Machine selector
Three questions about your space, the floor area per shift, and the flooring. You get the machine, the brush, and the chemistry for it.
Machine Selector
Find the right CRB machine in 3 questions
What kind of space do you clean most?
Pick the one that describes the majority of your route.
01 // Model comparison
TM3, TM4 and TM5 side by side
| Model | Width | Weight | Motor | Brush speed | Best for |
|---|---|---|---|---|---|
| TM3 | 12 in | about 40 lb | 500 W | 450 RPM | Tight spaces: stairs, guest rooms, cubicles, small suites |
| TM4 | 15 in | about 56 lb | 750 W | 380 RPM | Mixed routes: homes, small offices, typical hotel corridors |
| TM5 | 20 in | about 62 lb | 750 W | 380 RPM | Open areas: open corridors, showrooms, ballrooms, lobbies |
| Manta Ray | 15 or 20 in | TM4 or TM5 + 2-gal tank | 750 W | 380 RPM | Hard floors and long routes: foam or liquid solution fed at the brushes, no sprayer |
02 // Counter-rotating mechanics
What is a CRB machine?
CRB stands for counter-rotating brush. Two cylindrical brushes spin against each other, lifting the pile and working a small amount of solution or compound through it, so carpet and hard floors are cleaned with about 85 to 90 percent less water than wet extraction. It is the interim maintenance system the Carpet and Rug Institute describes: an encapsulating solution, a counter-rotating brush, and a vacuum.
- 01How encapsulation works →
Encapsulation carpet cleaning
A light polymer spray is brushed through the pile. As it dries, it locks soil into brittle crystals that the next vacuuming removes, with no sticky residue.
- 02Dry carpet cleaning guide →
Dry carpet cleaning compound
A moist, absorbent compound is brushed in, soaks up soil, and is vacuumed out. Carpet and hard floors are back in use in about 40 minutes.
- 03Tile and grout guide →
Tile and grout cleaning
Swap to a stiffer brush and the same machine works solution into grout lines on ceramic and porcelain tile, without leaving the floor soaking.
- 04Compare the methods →
Low moisture vs steam cleaning
Hot-water extraction is the deep reset. A CRB does the interim cleaning in between, with far less water in the backing and a much shorter dry time.
CRB Cleaning SystemsNew · Manta Ray Foam Injection System
From dry compound to foam technology.
The Manta Ray feeds cleaning solution through the machine to the brushes, so the operator never walks ahead with a sprayer or back to a bucket.
Delivery mode
Foam created by brush agitation
The Manta Ray feeds the liquid solution internally through the brush core to drizzle down the bristles. The 380–450 RPM brush agitation then whips the solution into a rich, low-moisture foam right on the surface, ensuring a deep clean without oversaturating the backing or subfloor.
- ✓ Self-contained low-moisture foam created via 380–450 RPM brush agitation
- ✓ Internal gravity/core feed: no messy external spray or overspray
- ✓ Residue-free encapsulation using CRB-approved chemistry
Deep cleaning, still low-moisture
Foam is created during the cleaning process for a more consistent low-moisture clean. No flooding, no recovery tank.
Built on the TM4 or TM5
Order it as a complete Manta Ray machine on a 15-inch TM4 or 20-inch TM5, or add it to a TM4 or TM5 you already own. Redesigned handle and hinges built for longevity.
One system, every surface
Foam or liquid solutions for commercial carpet, LVT, and hard floors. Swap the brush and chemistry, keep the machine.

- Easy-fill tank
- 2 gal
- Internal solution delivery
- No spray
- Solution types
- Foam / liquid
- 110 / 220 V
- 750 W · 380 RPM
