04 // Equipment & UV Inspection
CRB Owner Quick-Start: Brush Installation, Gear Care & Daily Maintenance
Most CRB problems are brush problems: the wrong color, a worn pair, or grit carried from grout onto carpet. This is the short routine that keeps a machine cleaning like new.
At a glance
- Dry time
- ~40 minwith CRB Dry Compound
- Moisture method
- Low-moisture encapsulation / dry compound
- Recommended brush
- Extra Soft WhiteSoft GrayStandard BlueStiff GreenExtra Stiff YellowUltra Soft Brown
- Ideal machine
- TM3 (12") / TM4 (15") / TM5 (20")
The 3-step process
- 1
Apply compound or encap pre-spray
A light, even application. No flooding, no soaked backing.
- 2
Counter-rotating cylindrical agitation
Two brushes turn against each other, lifting the pile and working chemistry in.
- 3
Lift soil & back in service
Vacuum the captured soil and reopen the space, often the same shift.
CRB vs. traditional wet extraction & rotary
| ✓ CRB low-moisture | Wet extraction / rotary | |
|---|---|---|
| Dry time | About 40 min or less with CRB dry compound | Soaked carpet can still be damp the next morning |
| Water in the floor | About 85–90% less water (CRB's comparison) | Floods the pile and backing |
| Wick-back & odor | Far less moisture left to wick back or sour | Moisture in the backing can wick, brown, or smell |
| Pile & surface | Cylindrical brushes lift and groom the pile | Rotary pads can distort pile; CRI 204 advises against rotary on carpet |
| Equipment | 40–62 lb, standard outlet, fits a closet or van | Truck access or portable extractor with hoses and tanks |
Keep a periodic hot-water extraction for heavy, oily, or salt-loaded soil. Dry time depends on humidity, airflow, and application rate.
A CRB machine has few parts an operator touches every day: two cylindrical brushes, the housing, and the handle. Keeping those right is most of the maintenance. This guide is for owners and crew leads who want a short, repeatable routine.
Unbox and assemble
If the machine arrives in the carton, follow CRB's seven-step assembly video before the first shift: How to assemble the machine. Train every operator on it once, so the machine goes together the same way every time.

The TM3 12-inch deck. The machine ships with the blue standard brush.
Brush colors and when to swap
Brush color is stiffness. The machine ships with a standard brush because one brush covers the widest range of work. A second set is how you stop damaging the exceptions.
| Brush | Use it on | Leave it off |
|---|---|---|
| White, extra soft | Delicate natural fibers, oriental rugs, new or delicate LVT | Rough tile, matted commercial loop |
| Gray, soft | Residential cut pile, commercial wool loop, many hotel carpets | Grout, concrete |
| Blue, standard | Commercial level loop, low cut pile, needle felt, lighter tile work | Wool that still fuzzes, very soft rugs, LVT |
| Green, stiff | Synthetic commercial loop that can take it, tile and grout, rough hard floors | Plush, wool, oriental rugs, LVT |
| Yellow, extra stiff | Unsealed concrete, outdoor patios, and a one-time restorative pass on severely matted commercial low loop, after the mill approves | Routine indoor carpet cleaning of any kind |
| Brown, special LVT (ultra soft) | Luxury vinyl tile and plank, smooth or embossed (general scrubbing) | Grout, rough tile, concrete, carpet |
Swap brushes whenever the floor changes, not just when they wear out. A wool corridor, a grout lobby, and an LVT suite each want a different pair.

Keep each color in its own labeled bag or bin, so the right pair goes on for the right floor.
Find your brush in 2 questions
Step 1 of 2
Install and change brushes
CRB's video shows the procedure for safely installing and replacing the brushes: How to install the brushes.
Three habits make every change safe and quick:
- Unplug the machine before you touch the brushes.
- Install a matched pair. Both brushes should be the same color.
- Check that both brushes turn freely by hand before you plug the machine back in.
Check the brush wear tester
CRB housings carry a built-in brush wear tester. Check it before the shift:
- Green: best result. Full bristle contact in the pile or grout joint.
- Yellow: acceptable. Schedule a replacement pair soon.
- Red: change the brush. The bristles are no longer agitating effectively.
Worn bristles stop opening the pile long before the motor feels weak. The result is chemistry sitting on top of the carpet instead of reaching the soil. A worn brush is the quiet failure mode.

The housing's brush tester runs from green (best) to red (change the brush).
Daily care checklist
Before the shift:
- Read the brush wear tester.
- Confirm the brush color matches the first floor on the route.
- Dry vacuum the floor before any chemistry goes down.
During the shift:
- Rinse a green brush that has scrubbed sandy grout before it goes onto carpet, or keep a dedicated hard-floor pair.
- On wool that has never been dry cleaned, test a closet first with the gray brush.
- On LVT, use only the Brown special LVT brush (or White on new, delicate vinyl) and a vinyl product such as ECO Luster. Never Blue, Green, or Yellow.
After the shift:
- Vacuum the dried encapsulation crystals or spent compound.
- Wipe the housing and handle, and store the brushes by color.
Gears and drive
CRB's Action Videos page lists gear maintenance as one of its owner topics. Gear service intervals are not published in this guide. Ask CRB for the current gear-care procedure for your model, and do not open the drive yourself without it.
Call CRB if the brushes stop turning evenly, if you hear grinding, or if the machine pulls hard to one side on a level floor.
Storage and warranty
CRB machines are listed at about 42.5 inches tall, so they fit a closet or a van. The 2026 brochure lists a one-year warranty on the machine and two years on the motor. Confirm the warranty card that ships with the unit you buy, and keep it with the machine.
Order parts and brushes
Replacement brushes, spare parts, and chemistry are on CRB's store:
- CRB shop
- CRB brushes
- Accessories & spare parts
- CRB UV flashlight for finding urine and pet stains before you clean
Order by the written description (soft wool, standard loop, stiff tile) and check the bristles when the box arrives.
Related reading
Talk with CRB
For gear service, warranty questions, or help choosing a second brush set, call 1-800-704-0527 or email info@crbclean.com.
Interactive configuration tools // apply this guide to your floor
